Recover from a GRBL reset on a Carbide 3D CNC machine

I did something dumb and managed to completely screw up my Carbide 3D Nomad 3 CNC machine, which is otherwise awesome. (I managed to do this with bCNC, which is also otherwise awesome.)

This is what Carbide 3D support told me to do.

This has been tested and verified for the Nomad 3 only.

1. Download Carbide Motion v5 from https://carbide3d.com/downloads/
   
   (Copies of these installer images are also available here as a last resort: CarbideMotion-582.dmg and CarbideMotion-582.exe.)
2. Install
3. Connect to Cutter
4. Go to Settings
5. Go to the Machine tab
6. Press the "Send Configuration Data" tab
7. Turn the machine off
8. Close Carbide Motion
9. Install the latest version of Carbide Motion from https://carbide3d.com/downloads/
10. Press "Setup New Machine"
11. Choose your machine from the dropdown
12. Press "Next"
13. Press "Connect to Machine"
14. Press "Initialize Machine"

Continue with the Setup Process. You are now back in business.

For the morbidly curious, you can run two versions of Carbide Motion at the same time using Sandboxie-Plus and configuring it to give native access to COM ports.